Loading ...
Loading ...
Loading ...
4. Insert the anchors into the wall and tighten the screws with a No. 2 Phillips screwdriver.
Leave about 0.25 in. (6 mm) of each screw protruding from the wall so that you can
insert the screws into the holes on the back of the access point.
5.
Line up the holes on the back of the access point with the screws in the wall and
mount the access point to the wall.
Mount outdoor model WAX610Y to a pole
To mount the access point to a pole:
1.
Locate the openings for the pole mounting strap on the back of the access point.
The arrows in the following figure show the middle opening.
2. Using a screwdriver, open the supplied pole-mounting strap.
User Manual242Mount Outdoor Model
WAX610Y to a Wall or Pole
Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y
Loading ...
Loading ...
Loading ...