Loading ...
Loading ...
Loading ...
4.
Select Management > Configuration > System > Basic > Time.
The page that displays lets you change the time settings.
5.
From the Time Zone menu, select the time zone for the area in which the access
point operates.
6. Click the Apply button.
Your settings are saved. When the access point connects over the Internet to an NTP
server, the date and time that display on the page are adjusted according to your
settings.
For information about other time settings, see Specify a custom NTP server on page
155.
Manage the syslog settings
If a syslog server is present on your network, you can configure the access point to send
its system logs to the syslog server.
To manage the syslog settings and enable the syslog function:
1.
Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 46.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 31.
The Dashboard page displays.
User Manual157Manage and Maintain the Access
Point
Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y
Loading ...
Loading ...
Loading ...