Loading ...
Loading ...
Loading ...
Note: If you hold the Reset button for less than 10 seconds and then release it, the
access point reboots rather than returns to its factory default settings.
3. Release the Reset button.
The configuration is reset to factory default settings. When the reset is complete,
the access point reboots. This process takes about two minutes.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset.
Do not turn off the access point. Wait until the access point finishes restarting and
the Power/Cloud LED turns solid green or solid blue.
Use the Reset button to reset outdoor model WAX610Y
You can use the Reset button to return the access point to its factory default settings.
However, if you added the access point to a NETGEAR Insight network location, you
must first use the Insight app or Insight Cloud portal to remove the access point from
the Insight network location before the factory default settings function of the Reset
button is available.
CAUTION: This process erases all settings that you configured in the access point.
To reset the access point to factory default settings:
1.
On the bottom panel of the access point, locate the recessed Reset button next to
the LAN/PoE+ port.
2.
Using a straightened paper clip, press and hold the Reset button for at least
10 seconds.
Note: If you hold the Reset button for less than 10 seconds and then release it, the
access point reboots rather than returns to its factory default settings.
User Manual171Manage and Maintain the Access
Point
Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y
Loading ...
Loading ...
Loading ...