Loading ...
Loading ...
Loading ...
4.
Select Management > Configuration > IP > LAN.
5.
In the Fully Qualified Domain Name field, specify the FQDN.
6. Click the Apply button.
Your settings are saved. The access point attempts to resolve the FDQN to an IP
address.
Enable or disable Spanning Tree Protocol
For locations where multiple access points are active and redundant network paths
might be present, Spanning Tree Protocol (STP) can prevent network loops. If your
location might include redundant network paths, we recommend that you enable STP.
To enable or disable Spanning Tree Protocol:
1.
Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 46.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
User Manual143Manage the Local Area Network
and IP Settings
Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y
Loading ...
Loading ...
Loading ...