Loading ...
Loading ...
Loading ...
The FQDN must be a domain name that is registered with a Domain Name System
(DNS) provider.
The following are the requirements for the FQDN:
•
The length can be from 1 to 64 characters.
•
Alphanumeric characters are allowed (a–z and 1–9)
•
A dot (.) and a hyphen (-) are allowed but the name cannot start with either.
An example is myap01_firstfloor_myorganization.com.
To specify a FQDN:
1.
Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 46.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 31.
The Dashboard page displays.
User Manual142Manage the Local Area Network
and IP Settings
Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y
Loading ...
Loading ...
Loading ...