Loading ...
Loading ...
Loading ...
Instrument Functions
R&S
®
NGL200/NGM200
88User Manual 1178.8736.02 ─ 09
2. Select "Enable" menu item to set "On" to enable wireless LAN.
The R&S NGL/NGM began searching available WiFi network and the "Status"
shows "Searching".
3. Select the "Select Network" to connect the required WiFi network.
If connection is successful, the "Status" shows "Connected". See
Figure 6-41.
When the connection is alive, the WLAN icon turns white on the device status bar.
See "Device status bar" on page 30.
Figure 6-41: WLAN connected
4. To disconnect, select the Disconnect in the "Wireless LAN settings" dialog.
6.16.2 USB Connection
Change of USB class
If a change in "USB Class" is detected (i.e. from "TMC" to "CDC" or vice versa), the
rebooting of instrument is necessary to load the correct USB driver.
●
A popup message is displayed: "A reboot of the device is required for this setting to
take effect.".
Alternatively, connect a USB cable to the USB port (see Figure 4-2) and PC for a USB
connection. The R&S NGL/NGM supports USB CDC and USB TMC connection.
1. Select "USB Class" from the "Network Connections" dialog.
The R&S NGL/NGM displays the USB class dialog to select the USB connection.
Interfaces
Loading ...
Loading ...
Loading ...