Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
138User Manual 1178.8736.02 ─ 09
[SOURce:]VOLTage:PROTection[:STATe]......................................................................... 138
[SOURce:]VOLTage:PROTection:CLEar........................................................................... 138
[SOURce:]VOLTage:PROTection:LEVel............................................................................138
[SOURce:]VOLTage:PROTection:TRIPped?......................................................................139
[SOURce:]VOLTage:PROTection[:STATe] <state>
[SOURce:]VOLTage:PROTection[:STATe]? [<Channel list>]
Sets or queries the OVP state of the previous selected channel.
Parameters:
<state> 0
OPP is deactivated
1
OPP is activated
Parameters for setting and query:
<Channel list> <list>
Example:
VOLT:PROT? (@1)
Queries OVP state at channel 1.
Example: See
Example "Configuring the overvoltage protection"
on page 137.
[SOURce:]VOLTage:PROTection:CLEar [<Channel list>]
Resets the OVP state of the selected channel. If an OVP event has occurred before,
the reset also erases the message on the display.
Setting parameters:
<Channel list> <list>
Example:
VOLT:PROT:CLEAR (@1)
Resets OVP state at channel 1.
Example: See
Example "Configuring the overvoltage protection"
on page 137.
Usage: Setting only
[SOURce:]VOLTage:PROTection:LEVel <voltage>
[SOURce:]VOLTage:PROTection:LEVel? [<Channel list>]
Sets or queries the overvoltage protection value of the selected channel.
Parameters:
<voltage> <numeric value> | MIN | MINimum | MAX | MAXimum | DEF |
DEFault | <list>
<numeric value>
Numeric value for the overvoltage protection value in V.
MIN | MINimum
Minimum value for the overvoltage protection value at 0.001 V.
Configuration Commands
Loading ...
Loading ...
Loading ...