Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
102User Manual 1178.8736.02 ─ 09
Parameters:
<brightness> Displays brightness for the instrument.
Range: 0.0 to 1.0
Increment: 0.1
*RST: 0.8
Example:
DISPlay:BRIGhtness 0.5
DISPlay:BRIGhtness? -> 0.5
Returns the display brightness value.
DISPlay[:WINDow]:TEXT:CLEar
Clears the text message box on the front display.
Usage: Setting only
DISPlay[:WINDow]:TEXT[:DATA] <string>
Displays a text message box on the front display.
Setting parameters:
<string> Text message for display.
Example:
DISPlay:TEXT "Instrument Test"
Usage: Setting only
7.4 Trigger Commands
The TRIGger subsystem contains the commands for signal triggering.
TRIGger[:STATe]............................................................................................................102
TRIGger[:SEQuence][:IMMediate]:SOURce......................................................................103
TRIGger[:SEQuence][:IMMediate]:SOURce:DIO:CHANnel.................................................103
TRIGger[:SEQuence][:IMMediate]:SOURce:DIO:PIN......................................................... 104
TRIGger[:SEQuence][:IMMediate]:SOURce:OMODe......................................................... 104
TRIGger[:SEQuence][:IMMediate]:SOURce:OMODe:CHANnel...........................................105
TRIGger[:SEQuence][:IMMediate]:SOURce:OUTPut:CHANnel........................................... 105
TRIGger[:STATe] <arg0>
Enables or disables the trigger system.
Upon being triggered, the selected trigger source
TRIGger[:SEQuence][:
IMMediate]:SOURce
on page 103 becomes active.
See
Figure 6-18.
Setting parameters:
<arg0> 1
Enables the trigger system.
Trigger Commands
Loading ...
Loading ...
Loading ...