Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
151User Manual 1178.8736.02 ─ 09
ARBitrary:SAVE............................................................................................................. 153
ARBitrary:STARt............................................................................................................ 154
ARBitrary:STOP.............................................................................................................154
ARBitrary:TRANsfer....................................................................................................... 154
ARBitrary:TRIGgered:MODE...........................................................................................154
ARBitrary:TRIGgered[:STATe]..........................................................................................155
ARBitrary[:STATe] <state>
ARBitrary[:STATe]? [<Channel list>]
Sets or queries the arbitrary function for the previous selected channel.
Parameters:
<state> 1
Arbitrary function is activated.
0
Arbitrary function is deactivated.
*RST: 0
Parameters for setting and query:
<Channel list> <list>
Example:
ARB ON
ARB? -> 1
Arbitrary function of Ch1 is activated.
Example:
ARB ON, (@1)
ARB? (@1)
Sets and queries the state of arbitrary function at channel 1.
Example: See
Example "Configuring an arbitrary sequence" on page 150.
ARBitrary:BEHavior:END <state>
ARBitrary:BEHavior:END?
Sets or queries the arbitrary endpoint behavior, when arbitrary function is finished.
Parameters:
<state> HOLD | OFF
OFF
If the arbitrary function is finished, the respective channel is
deactivated automatically.
HOLD
If the arbitrary function is finished, the last arbitrary point of the
user-defined arbitrary list is held.
*RST: OFF
Example: See
Example "Configuring an arbitrary sequence" on page 150.
Advanced Operating Commands
Loading ...
Loading ...
Loading ...