Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
154User Manual 1178.8736.02 ─ 09
Example:
INST OUT1
ARB:DATA 10,1,0.5,0
ARB:REP 10
ARB:FNAM "ARB03.CSV“,INT
ARB:SAVE
Saves a predefined arbitrary data to a filename ARB03.CSV in
the internal memory location.
Usage: Event
ARBitrary:STARt
Enables arbitrary for selected channel.
Command is same as ARB:STAT 1.
Usage: Event
See
Example "Configuring an arbitrary sequence" on page 150.
ARBitrary:STOP
Disables arbitrary for selected channel.
Command is same as ARB:STAT 0.
Usage: Event
See
Example "Configuring an arbitrary sequence" on page 150.
ARBitrary:TRANsfer <channel>
Transfers the defined arbitrary table to the selected channel.
Parameters:
<channel> 1 | 2
Example: See
Example "Configuring an arbitrary sequence" on page 150.
Usage: Setting only
ARBitrary:TRIGgered:MODE <mode>
ARBitrary:TRIGgered:MODE?
Sets or queries the arbitrary trigger mode of the previous selected channel.
Parameters:
<mode> SINGle | RUN
SINGle
A trigger event starts only with one arbitrary sequence.
RUN
A trigger event starts the whole arbitrary sequences (with all rep-
etitions).
Advanced Operating Commands
Loading ...
Loading ...
Loading ...