Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
135User Manual 1178.8736.02 ─ 09
FUSE:LINK <arg0>
FUSE:LINK? <arg0>
Sets or queries the fuses of several serlected channels (fuse linking).
Parameters for setting and query:
<arg0> 1 | 2
Example:
INST OUT1;:FUSE:LINK 2
Channel 2 is linked with channel 1
INST OUT1;:FUSE:LINK?2
Return 1 if channel 1 is linked with channel 2
Example: For alternative command, See
Example "Configuring the over-
current protection"
on page 129.
FUSE:TRIPped? [<Channel list>]
Queries the status if fuse has tripped in the selected channel.
Parameters:
<Channel list> <list>
Example:
FUSE:TRIP? (@1)
Queries fuse tripped status at channel 1.
Example: For alternative command, see
Example "Configuring the over-
current protection"
on page 129
Usage: Query only
FUSE:UNLink <channel>
Dissolves linked fuses.
Parameters:
<channel> 1 | 2
Example: For alternative command, see
Example "Configuring the over-
current protection"
on page 129
Usage: Setting only
FUSE[:STATe] <state>
FUSE[:STATe]? [<Channel list>]
Sets or queries the fuse function in the selected channel.
Parameters:
<state> 1
Fuse function is activated.
0
Fuse function is not activated.
Configuration Commands
Loading ...
Loading ...
Loading ...