Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
141User Manual 1178.8736.02 ─ 09
0
OPP is deactivated
1
OPP is activated
Parameters for setting and query:
<Channel list> <list>
Example:
POW:PROT? (@1)
Queries OPP state at channel 1.
Example: See
Example "Configuring the overpower protection"
on page 140.
[SOURce:]POWer:PROTection:CLEar [<Channel list>]
Resets the OPP state of the selected channel. If an OPP event has occurred before,
the reset also erases the message on the display.
Setting parameters:
<Channel list> <list>
Example:
POW:PROT:CLE (@1)
Resets OPP state at channel 1.
Example: See
Example "Configuring the overpower protection"
on page 140.
Usage: Setting only
[SOURce:]POWer:PROTection:LEVel <power>
[SOURce:]POWer:PROTection:LEVel? [<Channel list>]
Sets or queries the overvoltage protection value of the selected channel.
Parameters:
<power> <numeric value> | MIN | MINimum | MAX | MAXimum | DEF |
DEFault | <list>
<numeric value>
Numeric value of the power protection level in watts.
MIN | MINimum
Minimum value of the power protection level at 0.00 W.
MAX | MAXimum
Maximum value of the power protection level at 6.535050E+01
W.
DEF | DEFault
Default value of the power protection level at 6.535050E+01 W.
Range: 0.00 to 6.535050E+01
*RST: 6.535050E+01
Default unit: W
Configuration Commands
Loading ...
Loading ...
Loading ...