Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
175User Manual 1178.8736.02 ─ 09
LOG:TRIGgered <state>
LOG:TRIGgered?
Sets or queries the state for manual trigger logging function.
Parameters:
<state> 0
Manual trigger function is disabled.
1
Manual trigger function is enabled.
Example:
LOG:TRIG ON
LOG:TRIG? -> 1
7.9 Status Reporting Commands
The status reporting system stores all information on the present operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. The STATus:OPERation and
STATus:QUEStionable subsystems contains commands to control the status report-
ing structure of the instrument.
See
Chapter A.3.1, "Structure of a SCPI Status Register", on page 186.
7.9.1 STATus:OPERation Registers
The commands of the STATus:OPERation subsystem control the status reporting
structures of the STATus:OPERation register.
The suffix at <Channel> selects the instrument channel. the range is <1...2>.
STATus:OPERation:INSTrument:CONDition?....................................................................175
STATus:OPERation:INSTrument:ISUMmary<Channel>:CONDition?....................................175
STATus:OPERation:INSTrument:ENABle..........................................................................176
STATus:OPERation:INSTrument:ISUMmary<Channel>:ENABle..........................................176
STATus:OPERation:INSTrument[:EVENt]?........................................................................176
STATus:OPERation:INSTrument:ISUMmary<Channel>[:EVENt]?........................................176
STATus:OPERation:INSTrument:NTRansition................................................................... 176
STATus:OPERation:INSTrument:ISUMmary<Channel>:NTRansition................................... 176
STATus:OPERation:INSTrument:PTRansition................................................................... 177
STATus:OPERation:INSTrument:ISUMmary<Channel>:PTRansition................................... 177
STATus:OPERation:INSTrument:CONDition?
STATus:OPERation:INSTrument:ISUMmary<Channel>:CONDition? <Condition>
Returns the contents of the CONDition part of the status register to check for operation
instrument or measurement states. Reading the CONDition registers does not delete
the contents.
Status Reporting Commands
Loading ...
Loading ...
Loading ...