Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
155User Manual 1178.8736.02 ─ 09
ARBitrary:TRIGgered[:STATe] <state>
ARBitrary:TRIGgered[:STATe]?
Sets or queries the arbitrary trigger mode.
Parameters:
<state> 0
OFF - Trigger input is deactivated.
1
ON - Trigger input is activated.
Example:
INST OUT1
ARB:TRIG ON
ARB:TRIG? -> 1
Activates the Ch1 trigger mode for arbitrary function.
7.7.2 Ramp
The VOTage:RAMP subsystem contains the commands for configuring the ramp func-
tion for the output channels.
[SOURce:]VOLTage:RAMP[:STATe]................................................................................. 155
[SOURce:]VOLTage:RAMP:DURation.............................................................................. 156
[SOURce:]VOLTage:RAMP[:STATe] <state>
[SOURce:]VOLTage:RAMP[:STATe]? [<Channel list>]
Sets or queries the state of ramp function for the previous selected channel.
Parameters:
<state> 0
EasyRamp function is deactivated.
1
EasyRamp function is activated.
*RST: 0
Parameters for setting and query:
<Channel list> <list>
Example:
INST OUT1
VOLT:RAMP ON
VOLT:RAMP? -> 1
EasyRamp function of Ch1 is activated
Example:
VOLT:RAMP ON, (@1)
VOLT:RAMP? (@1)
Sets and queries the state of ramp function at channel 1.
Advanced Operating Commands
Loading ...
Loading ...
Loading ...