Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGL200/NGM200
113User Manual 1178.8736.02 ─ 09
INST OUT1
VOLT:STEP 4
VOLT UP
// decreases the voltage in the selected channel
// from 4 Volts
VOLT DOWN
// queries the voltage step size
VOLT:STEP?
// response: "4.000"
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]........................................................ 113
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]..............................................114
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <voltage>
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]? [<Channel list>]
Sets or queries the voltage value of the selected channel.
Parameters:
<voltage> <numeric value> | MIN | MINimum | MAX | MAXimum | UP |
DOWN | <list>
<numeric value>
Numeric value in V.
MIN | MINimum
Minimum voltage at 0.000 V.
MAX | MAXimum
Maximum voltage at 20.050 V.
UP
Increases voltage by a defined step size. See
[SOURce:
]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]
on page 114.
DOWN
Decreases voltage by a defined step size. See
[SOURce:
]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]
on page 114.
Range: 0.000 to 20.05
Default unit: V
Parameters for setting and query:
<Channel list> <list>
Example:
VOLT? (@1)
Queries the voltage at channel 1.
Example: See
Example "Configuring the output voltage" on page 112.
Configuration Commands
Loading ...
Loading ...
Loading ...