Loading ...
Loading ...
Loading ...
SIGLENT
User Manual 67
3.3.2 Trace
3.3.2.1 Select Trace
Select the trace in order to set the corresponding trace parameters. You can also select the trace by
clicking on the trace mark displayed in the left status bar of the screen. By default, track 1 is selected
and opened.
When the trace is selected, the background color will appear on the trace mark of the left status bar on
the screen.
● The number of traces that can be selected is affected by the "Num of Traces" parameter. For
example, if you set the "Num of Traces" to 3, traces 1 through 3 can be selected.
3.3.2.2 Num of Traces
Set the upper limit of displayed trace numbers. Up to four traces can be displayed simultaneously in the
screen window.
3.3.2.3 Display
Set the display content of the currently selected trace:
● Data
• Only display the measured data.
● Memory
• Only display the memory trace. A [M] icon is displayed in the left status bar of the screen.
● Data & Mem
• Display both the measured data and the memory trace. A [D&M] icon is displayed in the left
status bar of the screen.
● Trace Off
• Neither the measured data nor the memory trace is displayed.
● “Data -> Mem” operation is needed before trace can display memory data. If “Data -> Mem” is not
performed first, the two options of “Memory” and “Data & Mem” are grey and not optional.
3.3.2.4 Data -> Mem
Store the measured data in memory.
After "Data -> Mem" is executed, the selected trace for which measured data is displayed is provided
with an additional trace, called a memory trace, that temporarily stores measured data.
When selecting the trace to display "Memory" or "Data & Mem", the memory trace is displayed in the
screen. The memory trace is slightly thinner than the data trace.
Memory trace can be used as a reference for the data trace.
Loading ...
Loading ...
Loading ...