Loading ...
Loading ...
Loading ...
SIGLENT
8 User Manual
1. Handle
Pull up the handle vertically for easy carrying of the instrument. When you do not need the handle, press
it down.
2. USB Device Interface
Through this interface, the analyzer can be connected to PC for remote control.
3. LAN Interface
Through this interface, the analyzer can be connected to your local network (LAN) for remote control.
4. REF IN 10 MHz
The analyzer can use the internal or an external reference source.
● When a 10 MHz external clock signal is received through the [10 MHz IN] connector, this signal is
used as the external reference source and “Ext Ref” is displayed in the status bar of the user
interface. When the external reference is lost or not connected, the instrument switches to its
internal reference source automatically and “Ext Ref” on the screen disappears.
● The [10 MHz IN] and [10 MHz OUT] connectors are usually used to build synchronization among
multiple instruments.
5. REF OUT 10 MHz
The analyzer can use the internal or an external reference source.
● When an internal reference source is used, the [10 MHz OUT] connector can output a 10 MHz
clock signal generated by the analyzer. This signal can be used to synchronize other instruments.
● The [10 MHz OUT] and [10 MHz IN] connectors are usually used to build synchronization among
multiple instruments.
6. Trigger in
In external trigger mode, the analyzer will update the trace scan after the Trigger In connector receives
an external trigger signal that meets the trigger input specifications.
7. Security Lock Hole
If needed, you can use a security lock(purchased separately) to lock the analyzer to a desired location.
8. AC Power Supply
The analyzer accepts 100-240V, 50/60 or 100-120VA 400Hz power supply. Please use the power cord
provided as accessories to connect the instrument.
9. Fuse
Before power on, make sure the analyzer is protected by the proper input fuse.
Loading ...
Loading ...
Loading ...