Loading ...
Loading ...
Loading ...
SIGLENT
36 User Manual
Del Point
Delete the point whose number is selected in Mode.
Del All
Delete all the points.
Save/Load
Save or load the limit file.
X Offset
Set offsets of X axis.
Y Offset
Set offsets of Y axis
2.2.6.3 Limit2
Enable or disable limit2.
2.2.6.4 Limit2 Edit
Edit the properties of limit2.
Table 2-22 Limit2 Edit Menu
Function
Explanation
Type
Select upper or lower limit type. The default value is Lower.
Mode
Select limit line or limit point. The default value is Line.
Set the number of the point to be edited if you selected the point type, and
the range is 1 ~ 100.
Add point
Add a new point for editing.
X-axis
Edit the X-axis value (frequency or time) of the current point.
Amplitude
Edit the amplitude of the current point or line.
Del Point
Delete the point whose number is selected in Mode.
Del All
Delete all points.
Save/Load
Save or load the limit file.
X Offset
Set offsets of X axis.
Y Offset
Set offsets of Y axis
2.2.6.5 Test
Enable or disable the limit test function.
2.2.6.6 Setup
1. Fail to stop
Turn on or off the Fail to stop function. If the function is on, the analyzer will stop sweep and retain the
test result when the test result is “Fail”.
2. Buzzer
Turn on or off the buzzer. When the buzzer is on, it beeps when the test result is “Fail”.
3. X Axis
Set the X-axis to frequency or time domain. The default value is Freq.
Loading ...
Loading ...
Loading ...