Loading ...
Loading ...
Loading ...
SIGLENT
User Manual 153
Chapter 9 Programming Overview
The analyzer features LAN, USB Device, and GPIB_USB module interfaces. By using a computer with
these interfaces, and a suitable programming language (and/or NI-VISA software), users can remotely
control the analyzer based on SCPI (Standard Commands for Programmable Instruments) command
set, LabView and IVI (Interchangeable Virtual Instrument), to interoperate with other programmable
instruments.
This chapter introduces how to build communication between the analyzer and a controller computer
with these interfaces.
9.1 Remotely Operating the Analyzer
The analyzer provides both the USB and LAN connection which allows you to set up a remote operation
environment with a controller computer. A controller computer could be a personal computer (PC) or a
minicomputer. Some intelligent instruments also function as controllers.
9.1.1 USB: Connecting the Analyzer via the USB Device port
Refer to the following steps to finish the connection via USB-Device:
1. Install NI-VISA on your PC for USB-TMC driver.
2. Connect the analyzer USB Device port to a PC with a USB A-B cable.
3. Switch on the analyzer.
Figure 9-1 USB Device
The analyzer will be detected automatically as a new USB hardware.
9.1.2 LAN: Connecting the Analyzer via the LAN port
Refer to the following steps to finish the connection via LAN:
1. Install NI-VISA on your PC for VXI driver. Or without NI-VISA, using socket or telnet in your PC’s
Operating System.
2. Connect the analyzer to PC or the local area network with a LAN cable.
3. Switch on the analyzer.
Loading ...
Loading ...
Loading ...