Loading ...
Loading ...
Loading ...
SIGLENT
User Manual 157
Figure 9-10
Now the installation is complete, reboot your PC.
9.2.2 Build Communication Using Sockets/Telnet
Through the LAN interface, VXI-11, Sockets and Telnet protocols can be used to communicate with the
analyzer. VXI-11 is provided in NI-VISA, while Sockets and Telnet are commonly included in PC’s OS
initially.
Socket LAN is a method used to communicate with the analyzer over the LAN interface using the
Transmission Control Protocol/Internet Protocol (TCP/IP). A socket is a fundamental technology used
for computer networking and allows applications to communicate using standard mechanisms built into
network hardware and operating systems. The method accesses a port on the analyzer from which
bidirectional communication with a network computer can be established.
Before you can use sockets LAN, you must select the analyzer’s sockets port number to use:
● Standard mode: Available on port 5025. Use this port for programming.
● Telnet mode: The telnet SCPI service is available on port 5024.
9.3 Remote Control Capabilities
9.3.1 User-defined Programming
Users can use SCPI commands to program and control the analyzer. For details, refer to the
introductions in “Programming Examples”.
9.3.2 Send SCPI Commands via NI MAX
Users can control the analyzer remotely by sending SCPI commands via NI-MAX software. NI_MAX is
National Instruments Measurement and Automation Explorer. It is an executable program that enables
easy communication to troubleshoot issues with instrumentation.
Loading ...
Loading ...
Loading ...