Loading ...
Loading ...
Loading ...
Level 3 Level 4 Level 5 Descriptions
PrintPosition Y Offset
- Move the print start position (at the upper left corner of
pages) vertically from -500 (up) to +500 (down) dots in 300
dpi.
Auto FF
- - Allow the machine to print any remaining data
automatically.
HP LaserJet Font No.
- Set the font number.
Font Pitch
- Set the font pitch.
(Available only for certain fonts.)
Font Point
- Set the font size.
(Available only for certain fonts.)
Symbol Set
- Select the symbol or character set.
Table Print
- Print the code table.
Auto LF
- ON: CR -> CR+LF, OFF: CR -> CR
Auto CR
- ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP
- Select whether you want a line feed and carriage return
when the carriage position reaches the right margin.
Auto SKIP
- Select whether you want a line feed and carriage return
when the carriage position reaches the bottom margin.
Left Margin
- Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin
- Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin
- Set the top margin distance from the top edge of the
paper.
Bottom Margin
- Set the bottom margin distance from the bottom edge of
the paper.
Lines
- Set the number of lines on each page.
Tray Command
- Select this setting if a tray mismatch appears when you
use the HP drivers.
BR-Script 3 Error Print
- Choose whether the machine prints the error information
when errors occur.
CAPT
- Use CAPT (Colour Advanced Printing Technology) for
optimal print quality when printing a PS file created by a
non-Brother PS driver.
Colours and photos appear clearer and more accurate.
Print speed will be slower.
PDF Multiple Page
- Set the page layout when printing multiple pages.
PDF Print Opt
- Set the PDF Print setting to print either comments
(Markup) or stamps in the PDF file, along with the text.
Fit to Page
- Select if the machine scales or resizes the pages in the
PDF file to fit the selected paper size.
ClrCorrection Correction
- Initiate colour calibration to check and correct colours.
Reset
- Reset the calibration parameters to the default settings.
Auto Correct
- Set the machine to perform Colour Calibration and
Registration automatically.
ColourSettings Setting Mode
Select whether to apply the colour print settings of the
machine or the printer driver.
Colour Mode
Select the colour mode.
602
Loading ...
Loading ...
Loading ...