Loading ...
Loading ...
Loading ...
Focus
72
2 If necessary, use the joystick to move around the magnification frame and check other parts of the image.
• You can also drag your finger across the LCD screen to move the frame.
• Press the CANCEL button to return the magnification frame to the center position.
• Press the MAGN. button again to cancel the magnification.
* If one of the AF frames or a face detection frame is displayed on the screen, the area around the active frame will be magnified
instead.
NOTES
NOTES
• About Peaking/Magnification:
- You can use the > [
A
Assistance Functions] > [Peaking 1] and [Peaking 2] settings to set the color,
gain and frequency of the two peaking levels independently of each other.
- You can use the > [
A
Assistance Functions] > [Magn. Output] setting to select where to show the
magnified image.
- The assistance functions will not affect your recordings.
- Magnification will be turned off if you change the video configuration (A 52), turn > [v Camera
Setup] > [Digital IS] on/off, or if you turn slow & fast motion recording on/off while the magnified image is
displayed.
• Peaking/magnification are not available while the color bars are displayed.
One-Shot AF
In this focus mode, you will focus manually in most situations but still have the option to have the camera focus
automatically only once on the subject inside the AF frame. You can change the type and position of the AF
frame.
1 Set the focus mode on the lens to automatic (A 69).
2 Select > [
v
Camera Setup] > [AF Mode] > [One Shot].
3 If necessary, change the type and position of the AF frame
(A 75).
4Press and hold the ONE-SHOT AF button.
• A white AF frame will appear on the screen and the camera will
focus automatically. When you are using Face AF, the face detection
frame around the face of the person who has been determined to be the main subject will turn white.
• When correct focus has been achieved, the AF frame turns green. If the camera cannot focus automatically,
the AF frame will turn red.
• The AF frame will disappear when you release the ONE-SHOT AF button.
NOTES
NOTES
• One-shot AF will not work when Face AF is set to [Face Only] and a face has not been detected.
• When the aperture value used is F13 or higher, Dual Pixel CMOS AF will not work and the camera will focus
using contrast-detection autofocus.
Loading ...
Loading ...
Loading ...