Loading ...
Loading ...
Loading ...
147
Configuring Connection Settings
Offline Configuration without Connecting to a Network
1 In the [Select a network] screen, select [Configure Offline].
2 Select the network type.
• If you select [Infrastructure], continue with the procedure to enter the SSID and authentication mode, from
step 2 (A 146).
If you select [Camera Access Point Mode], continue from that procedure, from step 2 (A 145).
Configuring the Camera’s IP Address
This section explains how to configure the IP address. Available settings will change depending on the network
function selected.
1 Select the method used to configure IPv4 settings, [Automatic Setting] or [Manual Setting].
• When using the wizard to add a new connection setting, make the selection in the [IP Address Settings
(IPv4)] screen.
• If you select [Automatic Setting], skip to step 4.
[Manual Setting]
2 Select [IP Address] and [Subnet Mask] and enter the desired addresses using the data entry screen (A 25).
• To use a default gateway, select [Use Gateway] > [Enable] and then select [Gateway] and enter the address.
• To use a DNS address, select [Use DNS Address] > [Manual Setting] and enter the address.
3 Select [OK].
Both methods
4 Select whether to use TCP/IPv6 settings or not.
• To use IPv4 settings, select [Disable].
• To configure IPv6 settings (A 150).
Other Network Settings
Reading/Deleting a Root Certificate for FTP Transfer
When you use the [FTPS] transfer mode, you will need to read onto the camera the same root certificate saved
on the FTP server. You can also check the content of a previously loaded root certificate or delete it.
1 Set the camera to MEDIA mode.
2 Save the desired root certificate file onto the root directory of a card and insert it into card slot B.
3 Select > [ Network Settings] > [Advanced Settings] > [FTP Transfer Settings] > [Read Root
Certificate] > [OK].
• The root certificate file is read from the card.
• After reading a root certificate file, you can select [Root Certificate Details] to check the certificate’s issuer
and expiration date, or select [Delete Root Certificate] to delete the root certificate in the camera.
NOTES
• Only one root certificate, with one of the following file names, can be read by the camera: “ROOT.CER”,
“ROOT.CRT” and “ROOT.PEM”.
• If you transfer files using FTPS transfer with a self-signed certificate, you may not be able to trust the
destination server.
Loading ...
Loading ...
Loading ...