Loading ...
Loading ...
Loading ...
Focus
70
Manual Focus
Focus manually using the focus ring on the lens.
1 Select > [
v
Camera Setup] > [AF Mode] > [One Shot].
• You can set the lens’s focus mode switch to manual (A 69).
2 Turn the focus ring to adjust the focus.
NOTES
NOTES
• With some lenses, you may be able to operate the focus ring even when the focus mode is set to automatic.
• If you operate the zoom after focusing, the focus on the subject may be lost.
• If you focus manually and then leave the camera with the power turned on, the focus on the subject may be
lost after a while. This possible slight shift in focus is a result of the internal temperature rising in the camera
and lens. Check the focus before resuming shooting.
• When adjusting the focus, be careful not to touch the front of the lens or moving parts on the lens except for
the focus ring.
• When an RC-V100 Remote Controller is connected to the camera, you can adjust the focus with the remote
controller’s FOCUS dial. At default settings, turn the dial right to focus farther and left to focus nearer.
Using the RF lens's focus ring
- You can change the direction of the adjustment when operating the focus ring with the > [B System
Setup] > [Focus Ring Dir.] setting.
- You can link the amount of focus adjustment when using the focus ring to either the rotation angle or the
rotation speed with the > [B System Setup] > [Focus Ring Response] setting.
- When the lens is set to autofocus, you can enable/disable manual adjustments with the >
[B System Setup] > [Focus Ring Operation] setting.
Using the Focus Assistance Functions
In order to focus more accurately, you can use the following focus assistance functions: Dual Pixel Focus Guide,
an onscreen guide that shows you if the selected subject is in focus; peaking, which creates a clearer contrast
by emphasizing the outlines of the subject; and magnification, which enlarges the image on the screen. You can
use peaking and the focus guide or peaking and magnification simultaneously for greater effect.
Focus guide
The focus guide gives you an intuitive visual indication of the current focus distance and the direction and
amount of adjustment necessary to bring the selected subject into full focus. When used in combination with
face detection (A 75), the guide will focus on the vicinity of the eyes of the person detected as the main
subject.
1 Using direct touch control (A 49), you can touch the [Focus Guide] switch to turn on/off the focus guide.
• Alternatively, you can use the > [
A
Assistance Functions] > [Focus Guide] setting or an assignable
button set to [Focus Guide], to display/hide the focus guide.
• You can use the > [
A
Assistance Functions] > [Focus Guide 2nd Frame] setting to display a
second focus frame.
• The second focus guide frame will be displayed only when [AF Mode] is set to [One shot], or when the lens’s
focus mode is set to manual.
2 Touch the point where you want to focus on the LCD screen to move the focus guide.
• You can also use the joystick or SELECT dial to move the focus guide’s frame. Press the CANCEL button to
return the focus guide’s frame to the center of the screen.
• When both focus guide frames are displayed, press SET to move the focus guide between the two focus
frames.
Loading ...
Loading ...
Loading ...