Loading ...
Loading ...
Loading ...
Menu Options
172
1
The default value depends on the country/region of purchase.
2
Only when the GP-E2 GPS Receiver is connected to the camera.
[
¥
My Menu] menu (CAMERA mode only)
[Assign. Button 4 as REC] [On], [Off] (A 105)
When this setting is set to [On], assignable button 4's function changes to [REC] and cannot be changed.
This turns assignable button 4 to an alternative REC button.
[Onscreen REC/STBY Button] [On], [Off] (A 41)
When this setting is set to [On], the recording operation indicator (REC/STBY) on the CAMERA mode
screen becomes an onscreen button you can touch to start/stop recording.
[Touch Screen Response] [Normal], [Low] (A 21)
[Tally Lamp],
[SD Card Access LED]
[On], [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp]: The tally lamp (red, A 13) when the camera starts up and while recording. When this
setting is set to [Off], the power indicator (green) will also be disabled.
[SD Card Access LED]: The card access indicator (A 32) when the camera is accessing the card.
[Fan Mode] [Automatic], [Always On] (A 39)
[Fan Speed (STBY)] [Maximum], [High], [Middle], [Low]
[Fan Speed (REC)],
[Fan Speed (Always)], [Fan Speed]
[High], [Middle], [Low]
[Review Recording] [Entire Clip], [Last 4 sec] (A 47)
[GPS Auto Time]
2
[On], [Off]
When this setting is set to [On], the camera automatically adjust its date and time settings according to
the information received from the GPS signal.
• While the automatic date/time adjustment is activated, the > [
B
System Setup] > [Date/
Time] setting will not be available.
• The time will not be updated while recording video.
[DC IN Warning (V)] 11.5 V to 15.0 V in 0.1 V intervals (13.0 V) (A 20)
[Retract Lens] [On], [Off]
When a compatible lens (A 204) is attached to the camera and the focus mode switch on the lens is set
to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
[Reset Hour Meter] The camera has two “hour meters” – the first keeps track of total operation time and the second keeps
track of operation time since the last time the second hour meter was reset with this function.
[Certification Information] This displays select certification information that apply to this camera.
[Firmware]
[Camera], [Lens],
[Mount Adapter]
Check/update the firmware version of the camera, lens (A 28) or mount adapter.
Menu item Setting options and additional information
[CAMERA-1: Edit] to
[CAMERA-5: Edit]
[Register], [Move], [Delete], [Reset All], [Rename] (A 24)
Menu item Setting options and additional information
Loading ...
Loading ...
Loading ...