Loading ...
Loading ...
Loading ...
Configuring Connection Settings
146
Detected Access Points
The camera will automatically detect access points in the vicinity. After you select the desired access point, you
only need to enter the selected network’s password to connect the camera. For details about the access point’s
network name (SSID) and password refer to the wireless router’s instruction manual or consult the network
administrator in charge of the access point.
1 In the [Select a network] screen, scroll through the list of detected networks and select the desired network.
• If the access point is encrypted, enter the password of the access point using the keyboard screen (A 25).
2 Set the IP address (A 147).
3 Select [OK] to continue to configure the function settings.
• The communication settings are saved to an [NW] file.
• Continue with one the following procedures to configure the selected function’s settings.
FTP transfer (A 141), IP streaming (A 143), Browser Remote (A 144)
SSID/Authentication Mode Input
You can connect to a specific access point by manually entering its details. For details about the access point’s
network name (SSID) and password refer to the wireless router’s instruction manual or consult the network
administrator in charge of the access point.
1 In the [Select a network] screen, select [Enter SSID/Authentication Method].
2 Enter the SSID (network name) of the desired network and then select [OK].
• Enter the desired network name using the keyboard screen (A 25).
3 Select the network’s authentication method.
• If you select [Open System], select [Disable] (no encryption) and skip to step 6, or select [WEP] and continue
the procedure.
• If you select [Shared Key] or [Open System] > [WEP], select the key index.
4 Enter the password of the desired network and then select [OK].
• Enter the desired password using the keyboard screen (A 25).
5 Set the IP address (A 147).
6 Select [OK] to continue to configure the function settings.
• The communication settings are saved to an [NW] file.
• Continue with one the following procedures to configure the selected function’s settings.
FTP transfer (A 141), IP streaming (A 143), Browser Remote (A 144)
A list of active networks detected in the vicinity
will appear after the menu settings
Network name
(SSID, only ASCII characters)
Encrypted access point
Loading ...
Loading ...
Loading ...