Loading ...
Loading ...
Loading ...
Browser Remote: Controlling the Camera from a Network Device
162
3 [ Activate] button
• Touch the button to give priority to the metadata entered in this screen when recording clips. This overrides
the metadata read from a file saved on the SD card.
• Alternatively, on the camera, you can set > [Æ Recording/Media Setup] > [Metadata] > [Setting]
to [Remote].
4 [Overwrite Previous] button
Send the user memo information from the application, overwriting the metadata of the last clip recorded.
5 [Apply from Next] button
Send the user memo information from the application to the camera to be used in clips recorded after that.
(Does not overwrite the metadata of already recorded clips.)
6 [Overwrite] button
Send the user memo information from the application, overwriting the metadata of the clip currently being
recorded.
7 [Clear All] button
Touch to delete all the data entered.
NOTES
• The metadata sent to the camera from Browser Remote will be lost in the following cases.
- The camera is turned off.
- The > [Æ Recording/Media Setup] > [Metadata] > [Setting] setting was changed.
• Using Browser Remote ([ Activate] button) you can give priority to metadata sent from the application.
However, you cannot return the priority back to the SD card. To use a user memo file saved on a card you will
need to set > [Æ Recording/Media Setup] > [Metadata] > [Setting] to [SD Card] on the camera itself.
• If you use Browser Remote to transfer user memo information to a relay clip after the switch, the user memo
will not be recorded with the metadata of the clip recorded before the camera switched cards.
Loading ...
Loading ...
Loading ...