Loading ...
Loading ...
Loading ...
Problems and solutions
515
Problems and solutions
Solutions to some common issues are listed below.
Battery/display
The camera is on but does not respond:●
・ Wait for recording and other operations to end.
・ If the problem persists, turn the camera o.
・ If the camera does not turn o, remove and reinsert the battery.
- Any data currently being recorded will be lost.
- Data that have already been recorded are not aected by removing
the battery.
The viewnder or monitor does not turn on:●
・ Have you changed the monitor mode? Choose a dierent monitor mode
using the
M
button.
・ Have you limited the choice of monitor modes available using the [Limit
monitor mode selection] item in the setup menu? Adjust settings as
required.
・ Dust, lint, or other foreign matter on the eye sensor may prevent it
functioning normally. Clean the eye sensor with a blower.
The viewnder is out of focus:●
・ Rotate the diopter adjustment control to adjust viewnder focus.
・ If adjusting viewnder focus does not correct the problem, set the focus
mode to AF-S and the AF-area mode to single-point AF. Next, select the
center focus point, choose a high-contrast subject, and focus using
autofocus. With the camera in focus, use the diopter adjustment control
to bring the subject into clear focus in the viewnder.
The display in the viewnder, monitor, or control panel turns o
without warning:
●
Choose longer delays for Custom Setting c3 [Power o delay].
Loading ...
Loading ...
Loading ...