Loading ...
Loading ...
Loading ...
Cargo elements
Fig. 112 Remove cargo element / Load fastening example
Read and observe and on page 81 first.
The cargo element is designed for attaching and securing objects with a maxi-
mum total weight of 8 kg.
›
Before use, remove the Cargo element in the direction of the arrow » Fig. 112
-
.
›
Use thecargoelements to secure the load as close as possible to the rear
seats» Fig. 112
.
›
After use, stow the Cargo element in its original position.
Flexible storage compartment
Fig. 113
Flexible storage compartment
Read and observe and on page 81 first.
The flexible storage compartment can be installed on either side of the boot
» Fig. 113.
The storage compartment is designed for storing small objects with a maxi-
mum total weight of 8 kg.
›
To use,insert the two ends of the storage compartment into the openings in
the side trim of the luggage compartment and push the shelf down to lock.
›
ToRemovegrasp the storage compartment at the top edges and remove by
pulling upwards and towards you.
Storage compartments under the floor
Fig. 114 Fold the floor back / storage compartment under the floor
Read and observe and on page 81 first.
The storage compartment
A
is located under the floor of the luggage com-
partment» Fig. 114.
›
Lift the rear portion of the floor and fold forward in the direction of arrow
1
- .
The storage compartment is designed for storing small objects of up to 15 kg.
in weight in total.
Class N1 vehicles
Read and observe and on page 81 first.
In class N1 vehicles that are not fitted with a protective grille, a lashing set that
complies with the EN 12195 standard (1-4) must be used for fastening the load.
Proper functioning of the electrical installation is essential for safe vehicle op-
eration. It is important to ensure that the electrical installation is not damaged
during the adjustment process or when the storage area is being loaded and
unloaded.
86
Operation
Loading ...
Loading ...
Loading ...