Loading ...
Loading ...
Loading ...
Replacing the bulb for the main beam (Halogen headlights)
Fig. 303 Changing the bulb for the main beam
Read and observe and on page 236 first.
Remove the mounting for the mopping water container nozzle before replac-
ing the lamp in the right headlight » page 238.
›
Remove the protective cap
E
» Fig. 295 on page 237.
›
Turn the holder with the bulb in the direction of arrow
1
» Fig. 303.
›
Remove the holder with the bulb in the direction of arrow
2
.
›
Remove the bulb from the holder in the direction of the arrow
3
.
›
Insert a new bulb into the connector so that the lug
A
on the connector
snaps into the groove on the bulb.
›
Insert the connector with the new bulb into the headlight in the opposite di-
rection to the arrow
2
.
›
Turn the connector with the new bulb in the opposite direction to the arrow
1
until it stops.
›
Fit the protective cap
E
» Fig. 295 on page 237.
After changing the bulb in the right headlamp, replace the mounting for the
mopping water container nozzle » page 238.
Replacing the bulb for the turn signal light (Halogen headlights)
Fig. 304 Changing the bulb for the turn signal light
Read and observe and on page 236 first.
To replace lamp, first remove mounting for the mopping water container noz-
zle in the right headlight » page 238.
›
Remove the protective cap
E
» Fig. 295 on page 237.
›
Remove the holder with the bulb by jiggling it out in the direction of the ar-
row
1
» Fig. 304.
›
Hold the housing containing the bulb in area
A
.
›
Remove the faulty bulb from the housing in the direction of the arrow
2
.
›
Insert a new bulb in the housing until it stops.
›
Insert the housing with bulb into the headlight again.
›
Fit the protective cap
E
» Fig. 295 on page 237.
After changing the bulb in the right headlamp, replace the mounting for the
mopping water container nozzle » page 238.
241
Fuses and light bulbs
Loading ...
Loading ...
Loading ...