Loading ...
Loading ...
Loading ...
Force limiter
Read and observe and on page 58 first.
Only version 2 of the power windows is equipped with the power limiter
(does not apply to the passenger window).
If there is an obstacle, the closing process is stopped and the window goes
down by several centimetres.
If the obstacle prevents the window from being closed during the next 10 sec-
onds, the closing process is interrupted once again and the window goes down
by several centimetres.
If you attempt to close the window again within 10 seconds of the window be-
ing moved down for the second time, even though the obstacle was not yet
been removed, the closing process is only stopped. During this time it is not
possible to automatically close the window. The force limiter is still switched
on.
The force limiter is only not operational if you attempt to close the window
again within the next 10 seconds – the window will now close with full force!
If you wait longer than 10 seconds, the force limiter is switched on again.
WARNING
■
Variant 1 of the electric power window » Fig. 52 on page 59 has no force
limiter. The windows should be closed carefully – risk of injury!
■
The passenger window in variant 2 of the electric power windows
» Fig. 52 on page 59 has no force limiter. The window should nevertheless
be closed carefully – risk of injury!
Malfunctions
Read and observe and on page 58 first.
Repeatedly opening and closing the window can cause the window mechanism
to overheat and become temporarily blocked. You will be able to operate the
window again as soon as the operating mechanisms has cooled down.
After disconnecting the vehicle battery, automatic opening/closing the driver's
window can be deactivated (applies to variant 2). In this case, the system must
be activated as follows.
Activating window operation
›
Switch on the ignition.
›
Pull the top edge of the button and close the window.
›
Release the button.
›
Pull up the respective button and hold for 1 second.
60
Operation
Loading ...
Loading ...
Loading ...