Loading ...
Loading ...
Loading ...
CAUTION
■
Do not take hold of the glass bulb with naked fingers (even the smallest
amount of dirt reduces the working life of the light bulb). Use a clean cloth,
napkin, or similar.
■
The cap of the filament bulb must always be seated correctly in the head-
light, otherwise this may allow water and debris to enter the headlight - risk of
damage to the headlights.
Note
We recommend that a box of replacement bulbs always be carried in the vehi-
cle.
Bulb arrangement in the halogen headlights
Fig. 295 Left headlamp: halogen/halogen projector headlights
Read and observe and on page 236 first.
Bulb arrangement » Fig. 295
Dayl. dri. light
Low beam, high beam and parking light
Flashing
Low beam
High beam and turning signal switch
A
B
C
D
E
Cover the front wheel Removing / replacing
Fig. 296
Remove plastic cover
Read and observe and on page 236 first.
The cover in the front wheel well must be removed in order to change certain
light bulbs.
Details about removing the cover if needed, are given in the description of
each lamp change.
Removal
›
Adjust front wheels in the direction of centre of the vehicle.
›
Insert the clamp for removing the full wheel covers» page 221, Vehicle tool
kitinto the recess in the cover.
›
Remove the cover by pulling the hook in the direction of arrow » Fig. 296.
Inserting
›
Insert and push the cover into the corresponding opening.
The cover must engage securely.
237
Fuses and light bulbs
Loading ...
Loading ...
Loading ...