Loading ...
Loading ...
Loading ...
For the complete functionality of the application, data transmission from ex-
ternal devices must be activated and, if necessary, operation of the Infotain-
ment via the application must be approved.
Applies to Infotainment Amundsen, Bolero
›
Activate data transfer in Infotainment. To do this, press the
button and
then tap function surface →
Mobile device data transfer
→
Activate data transfer
for ŠKODA Apps
.
›
Release Infotainment operation using the application. To do this, press the
button and then tap function surface →
Mobile device data transfer
→
Use
apps to operate:
→
Confirm
/
Allow
.
›
Connect Infotainment to an external device via WLAN » page 140.
›
In the external device, launch an application for Infotainment operation (e.g.
ŠKODA Media Command).
Note
The description of Infotainment operation using ŠKODA Media Command is
part of the application.
Voice control
Introduction to the subject
Applies to Infotainment Amundsen, Bolero.
The navigation, telephone, radio and media menus can be operated by voice
commands.
The voice control system can be used either by the driver or by the front pas-
senger.
Function requirements for voice control
Infotainment is switched on.
No telephone call is being made using a telephone connected to Infotain-
ment.
The parking aid is not active.
Requirements for optimum voice command recognition
▶
The voice commands must only be issued when the symbol is displayed on
the Infotainment screen and the input tone has completely faded.
▶
Speak at your normal volume without intonation and long pauses.
▶
Avoid bad pronunciation.
▶
Close the doors and windows in order to prevent environmental influences
from interfering with the function of the voice control.
▶
You are advised to speak louder at higher speeds, so that the sound of your
voice is not drowned out by the increased ambient noise.
▶
During voice control, limit additional noise in the vehicle, e.g. passengers talk-
ing at the same time.
WARNING
The emergency number should be dialled manually. Your voice commands
may not be recognised in such situations. The telephone connection may
not be established or the connection may take too much time to complete.
CAUTION
■
The messages are generated by Infotainment. Flawless clarity (e.g. road or
city name) cannot always be guaranteed.
■
For some Infotainment languages, voice control is not available. Infotainment
indicates this through a text message that is displayed on the screen after set-
ting the Infotainment language.
Note
During voice control, no navigation announcements and traffic announce-
ments are played.
Switching voice control on/off
Fig. 143
Voice control: Main menu
Switch on
›
Press the button on the multifunction steering wheel or button
on
the Infotainment system.
The main menu is displayed » Fig. 143.
103
Infotainment operation
Loading ...
Loading ...
Loading ...