Loading ...
Loading ...
Loading ...
Operation
Fig. 219 Installation location of the sensors on the left side of the vehi-
cle: front/rear
Fig. 220
Sampled areas and range of the
sensors
Read and observe and on page 177 first.
The system uses ultrasound waves to calculate the distance between the
bumper and an obstacle. The ultrasonic sensors are, depending on vehicle
equipment,, located in the back or in the front bumper » Fig. 219.
Depending on the equipment, the following system versions are possible
» Fig. 220.
▶
Variant 1: warns of obstacles in areas
C
,
D
.
▶
Variant 2: warns of obstacles in areas
A
,
B
,
C
,
D
.
Approximate range of sensors (in cm)
Area » Fig. 220 Variant 1
(3 sensors)
Variant 2
(7 sensors)
A
- 120
B
- 60
C
160 160
D
60 60
Audible signals
The interval between the acoustic signals becomes shorter as the clearance is
reduced. At a distance of approx. 30 cm a continuous tone starts to sound -
danger area.
The acoustic signals can be set in the Infotainment system » page 177.
Towing a trailer
When towing, or when another accessory is connected to the trailer socket,
only areas
A
and
B
» Fig. 220 are active in the system.
Note
The signal tones for front obstacle recognition are factory-set to be higher
than for rear obstacle recognition.
Display Infotainment screen
Fig. 221
Screen display
Read and observe and on page 177 first.
Function surfaces and warnings » Fig. 221
A
Road display.
178
Driving
Loading ...
Loading ...
Loading ...