Loading ...
Loading ...
Loading ...
The system can be activated/deactivated in Infotainment menu
→ →
Driv-
er assistance
.
Pause recommendation
The icon appears and the following message for a few seconds in the display
of the instrument cluster and a message about the detected fatigue. An au-
dible signal is also emitted.
WARNING
■
The general information relating to the use of assistance systems must be
observed » page 174, in section Introduction.
■
For the driving ability is always the driver's responsibility. Never drive if
you feel tired.
■
The system may not detect all cases where a break is needed.
■
Therefore, take regular, sufficient breaks during long trips.
■
There will be no system warning during the so-called micro-sleep.
Note
■
In some situations, the system can evaluate the steering behaviour incorrect-
ly and therefore falsely display a break recommendation.
■
The system is designed primarily for use on motorways.
Tyre pressure monitoring
Introduction
The tyre pressure monitoring function (hereinafter known as "system") moni-
tors the tyre pressure while driving.
If the tyre inflation pressure changes, the warning light lights up in the in-
strument cluster and an audible signal is heard » page 41.
The system can only function properly if the tyres have the prescribed tyre
pressure and this pressure values are stored in the system.
The tyre pressure valuesare always stored in the system, if one of the fol-
lowing events is present.
▶
Change of tyre pressure values.
▶
Change one or more wheels.
▶
Change in position of a wheel on the vehicle.
▶
The warning light in the instrument cluster.
WARNING
■
The general information relating to the use of assistance systems must be
observed » page 174, in section Introduction.
■
The correct tyre pressure values is always the driver's responsibility. The
tyre pressure should be checked regularly » page 216.
■
The system cannot warn in case of very rapid loss of tyre pressure, e.g. in
the event of a sudden puncture.
■
Before storing the tyre pressures they must be inflated to the specified
inflation pressure » page 216. If incorrect pressure values are storedthe
system may not warn even with a tyre pressure that is too low.
CAUTION
To ensure proper system function, the tyre pressure values must be stored ev-
ery 10,000 km or 1x a year.
Storing the tyre pressure values and Infotainment display
Fig. 240
Button for storing / Example of
screen display: it indicates a
front left tyre pressure change
Read and observe and on page 192 first.
Procedure for storing the tyre pressure values
›
Inflate all of the tyres to the specified inflation pressure.
›
Turn on the ignition and switch on Infotainment.
›
In the Infotainment, in menu
, tap in the function surface Tap →
Vehicle
status
.
›
Use the function interfaces
to select menu item Tyre Press. Loss Indica-
tor.
›
Tap the function surface » Fig. 240.
In addition, follow the instructions that appear on the screen.
192
Driving
Loading ...
Loading ...
Loading ...