Loading ...
Loading ...
Loading ...
Full wheel trim
Remove trim
›
Hang the clamps for removing the full wheel trims at the edge of one of the
ventilation openings in the full wheel trim.
›
Push the wheel wrench through the clamp, support on the tyre and pull off
the wheel trim.
Install trim
›
Press the wheel trim onto the wheel rim at the designated valve opening.
›
Then press the trim into the wheel rim until its entire circumference latches
correctly into position.
The position of the anti-theft wheel bolt is indicated by means of a symbol on
the back of the wheel trim supplied ex-factory or from the ŠKODA Original
Accessories. If using the anti-theft wheel bolt it should be fitted at this point
» .
WARNING
We recommend that you use wheel trims from ŠKODA Original Accesso-
ries. A sufficient air supply may not be able to be guaranteed with other
wheel trims to cool the braking system – Otherwise there is a risk of an ac-
cident.
CAUTION
■
If the wheel trim is positioned outside the position marked for the anti-theft
wheel bolt, there is a risk of damaging the wheel cover.
■
Use only manual pressure and do not hit the full wheel trim – otherwise there
is a risk of damaging the trim.
Note
We recommend that you use wheel trims from ŠKODA Original Accessories.
Wheel bolts
Fig. 272
Remove the cap
›
To remove the cap insert the extraction pliers as far as they will go on the
cap and pulling them out in the direction of arrow » Fig. 272.
›
To install, insert the cap onto the wheel bolt as far as it will go.
Anti-theft wheel bolts
Fig. 273
Anti-theft wheel bolt and at-
tachment
The anti-theft wheel bolts protect wheels from being stolen. This can only be
loosened/tightened with attachment
B
» Fig. 273.
›
Insert the upper section
B
on the anti-theft wheel bolt
A
until it stops.
›
Insert the key as far as it will go onto attachment
B
and loosen / tighten the
wheel bolt.
›
Remove the attachment.
The attachment for the anti-theft wheel bolts must always be kept in the
vehicle in case of a possible wheel change!
For wheel trims supplied ex-factory or from ŠKODA Original Accessories, the
anti-theft wheel bolt should be installed in the position marked on the back of
the wheel trim.
223
Emergency equipment, and self-help
Loading ...
Loading ...
Loading ...