Loading ...
Loading ...
Loading ...
CAUTION
■
Ensure that the cable bundle does not become stuck between the body and
the lamp when it is being refitted – or there is a risk of damage to the electrical
installation and risk of water ingress.
■
If you are not sure whether the wiring harness has become pinched, we rec-
ommend that you have the light connection checked by a specialist garage.
■
Ensure that the vehicle paintwork and the tail lamp are not damaged when
removing and installing the tail lamp.
Replacing the bulbs in the tail lamp assembly
Fig. 307
Outer part of the lamp / removing the bulb / lamp holder
Read and observe and on page 236 first.
Outer part of the lamp
›
Turn the holder with the bulb
A
in the direction of arrow
1
» Fig. 307.
›
Remove the socket with the bulb from the lamp housing in the direction of
arrow
2
.
›
Jiggle the bulb to remove.
›
Insert a new bulb into the socket.
›
Reinsert the holder with the bulb into the lamp housing and turn in the oppo-
site direction of the arrow
1
to the stop.
Inner part of the light
›
Turn the holders with the bulbs
A
in the direction of the arrow
1
» Fig. 307.
›
Remove the holders with the bulbs from the lamp housing in the direction of
the arrow
2
.
›
Unlock the bulb holder at the areas marked with arrows » Fig. 307 and re-
move the bulb holder from the light.
›
Turn the respective light bulb counter-clockwise to the stop and remove it
from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the bulb holder in the light. The holder must engage securely.
›
Reinsert the holders with the bulbs
A
into the lamp housing and turn in the
opposite direction of the arrow
1
up to the latch.
243
Fuses and light bulbs
Loading ...
Loading ...
Loading ...