Loading ...
Loading ...
Loading ...
A message on the screen informs you about the storage of the tyre pressure
values.
Note
When a warning light in the instrument cluster appears, the affected tyre
can be displayed on the infotainment » Fig. 240.
Storing the tire pressure values using the key
Fig. 241
Button for storing the pressure
values
Read and observe and on page 192 first.
›
Inflate all of the tyres to the specified inflation pressure.
›
Switch on the ignition.
›
Press the symbol key » Fig. 241 on the button and hold.
The warning light
in the instrument cluster illuminates.
An acoustic signal sounds and the warning light goes out, indicating that the
tyre pressure values have been stored.
›
Release the symbol key .
Towing device and trailer
Hitch
Introduction
The maximum trailer load is dependent on the engine and the vehicle equip-
ment. The valid specification for your vehicle can be found in the technical ve-
hicle documentation, the declaration of conformity (the so-called COC docu-
ment) or at a ŠKODA partner.
Other data (e.g. shown onthe nameplate of the hitch) on provides information
about the test values of the device .
WARNING
■
Check that the ball head is seated correctly and is secured in the mount-
ing recess before starting any journey.
■
When the knee-joint bar is not used and properly secured in the receiving
shaft, it is damaged or incomplete, this must not be used - there is a risk of
an accident.
■
Do not modify or adapt the towing equipment in any way.
■
Keep the mounting recess of the towing equipment clean at all times.
Such dirt prevents the ball head from being attached securely.
193
Towing device and trailer
Loading ...
Loading ...
Loading ...