Loading ...
Loading ...
Loading ...
Multifunction pocket
Fig. 105
Securing the multifunction
pocket
Read and observe and on page 81 first.
The pocket » Fig. 105 can be secured to the fastening elements
A
,
B
and
C
» Fig. 102 on page 82.
The maximum permissible load for the bag attached to fastening elements is 3
kg.
CAUTION
In vehicles with a variable loading floor, it is not possible to secure the bag to
the fastening elements.
Hooks
Fig. 106
Hooks
Read and observe and on page 81 first.
A hook for attaching small items of luggage, such as bags etc., is provided on
each side of the luggage compartment» Fig. 106.
The maximum permissible load of the hook is 7.5 kg.
CAUTION
■
If possible, take the item of luggage suspended from the hook and place it in
the storage compartment
B
» Fig. 111 on page 85, otherwise there is a risk of
damaging the storage compartment cover.
■
If an item of luggage weighing more than 2.5 kg is suspended on the hook,
then we recommend removing the storage compartment cover
B
» Fig. 111 on
page 85, otherwise there is a risk of damaging the storage compartment cov-
er.
Luggage compartment cover
Fig. 107
Remove the luggage compartment cover
Read and observe and on page 81 first.
If the support straps
A
» Fig. 107 are attached to the boot lid, then opening
the lid will raise the boot lid cover (hereafter referred to as cover).
The cover can be removed from the vehicle and stowed behind the rear seat
backrests if required » Fig. 108 on page 84.
The maximum permissible load of the cover is 1 kg.
Removing
›
On both sides of the boot lid, unhook the straps
A
in the direction of arrow
1
» Fig. 107.
›
Hold the raised cover and press on the two sides on the underside of the
cover in the area of the recess
C
.
›
Remove the cover in the direction of the arrow
2
.
Fitting
›
Place the fixtures
B
on the cover above the brackets
C
on the side trim
» Fig. 107.
83
Transport of cargo
Loading ...
Loading ...
Loading ...