Loading ...
Loading ...
Loading ...
Guidelines and function surfaces
Fig. 225 Infotainment screen: orientation lines/function surfaces
Read and observe and on page 180 first.
On the screen, orientation lines are shown along with the monitored area be-
hind the vehicle.
Distance of the orientation lines behind the vehicle » Fig. 225
The distance is about 40 cm (safety distance limit).
The distance is about 100 cm.
The distance is about 200 cm.
The distance may vary slightly depending on the load of the vehicle and the
road inclination.
The distance between the side lines corresponds approximately to the vehicle
width including mirrors.
Function surfaces » Fig. 225
Depending on the Infotainment type: Switches off the display of the
area behind the vehicle
Screen settings – brightness, contrast, colour
Switching audible parking signals on/off
Enabling and reduced park assistance display
Change to park assistance display
CAUTION
The objects shown on the screen can be closer or even further away than they
appear. This is especially the case in the following situations.
■
Protruding objects, such as the rear of a truck and the like.
A
B
C
■
When driving from a horizontal surface into a slope or a depression.
■
When driving from a slope or a depression onto a horizontal surface.
Cruise Control System
Introduction
The Cruise Control System (CCS) maintains a set speed without you having to
actuate the accelerator pedal. The status where the CCS maintains the speed
is referred to hereinafter as the control.
WARNING
■
The general information relating to the use of assistance systems must be
observed » page 174, in section Introduction.
■
After pressing the clutch pedal, no interrupted control occurs! For exam-
ple, if a different gear is engaged and the clutch pedal is released, control is
continued.
Operation
Fig. 226
MAXI DOT display (monochromatic): Examples of CCS status
displays
181
Assist systems
Loading ...
Loading ...
Loading ...