Loading ...
Loading ...
Loading ...
Key with fold-out key bit
Fig. 282 Opening the cover/removing the battery
Read and observe on page 229 first.
›
Pop out the key bit.
›
Press off the battery cover
A
» Fig. 282 with your thumb or by using a flat
screwdriver in region
B
.
›
Open the battery in the direction of the arrow
1
.
›
Remove the discharged battery in the direction of arrow
2
and install a new
battery.
›
Insert the battery cover
A
and press it down until it clicks audibly into place.
The key has to be synchronised if the vehicle cannot be unlocked or locked
with the key after replacing the battery » page 56.
Emergency unlocking/locking of doors
Unlocking/locking the driver's door
Fig. 283 Handle on the driver's door: open lock cover/lock cylinder with
key
The driver's door can be emergency unlocked / emergency locked using the
key via the lock cylinder.
›
Pull on the door handle and hold.
›
Insert the key into the recess on the lower side of the cover and fold up the
cover in the direction of arrow » Fig. 283.
›
Release the door handle.
›
For vehicles with LHD, insert the key with the fold-out key bit with the but-
tons facing upwards » Fig. 283 into the lock cylinder and unlock/lock the ve-
hicle.
›
For vehicles with RHD, insert the key with the fold-out key bit with the but-
tons facing downwards into the lock and unlock/lock the vehicle.
›
Pull on the door handle and hold.
›
Replace the cover.
CAUTION
Make sure you do not damage the paint when performing an emergency lock-
ing/unlocking.
230
Do-it-yourself
Loading ...
Loading ...
Loading ...