Loading ...
Loading ...
Loading ...
242
Subject is too far away for
flash to reach.
z Shoot within correct flash range of the
subject when using the built-in flash
(p. 283).
z Raise the ISO speed and then shoot
(p. 86).
Subject in recorded image is too bright, or image
flashes white.
Subject is too close,
making the flash too
strong.
z Shoot within correct flash range of the
subject when using the built-in flash
(p. 283).
z Adjust [Flash Exp. Comp] or [Flash
Output] in the [Flash Control] menu
(p. 112).
z Set the safety FE to [On] (p. 113).
The subject is
overexposed because the
surroundings are too dark.
z Set the exposure compensation to a
negative (–) setting (p. 136).
z Use the AE lock or spot metering
functions (p. 139).
Too much light is shining
directly into the camera, or
is being reflected off the
subject.
z Change the shooting angle.
Flash is set to (Flash
on).
z Push down the flash to (Flash off)
(p. 72).
Image contains noise.
ISO speed is too high. z Higher ISO speeds and (High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 86).
z In and modes, or , , ,
and modes in the mode,
or when using the Auto ISO Shift, the
ISO speed increases and noise can
appear.
COPY
Loading ...
Loading ...
Loading ...