Loading ...
Loading ...
Loading ...
Administrator Mode
75
4
Wiegand Function
Note this function is only available for GV-VS04H and GV-VS14.
The GV-Video Server can work in conjunction with the Wiegand-interface card reader to
send video and cardholder data to the central monitoring stations Center V2 and Vital Sign
Monitor, as well as GV-DVR / NVR. Moreover, the Wiegand port on the GV-Video Server
can be used as an input to activate recording once the card reader is triggered or a valid
card is presented to the card reader.
The output format of Wiegand supported by the GV-Video Server is HID standard 26 bits
and 37 bits.
GV-Video Server
TCP
/
IP
GV-Vital Sign Monitor
Text Data
GV-Center V2
Video Data
Text Data
Wiegand In
Card Reader
Recording
USB Mass Storage Device
GV-DVR / NVR
Text Data
Video Data
Figure 4-23
Transfer Card Number to Center V2, Vital Sign Monitor and GV-DVR / NVR: Sends
the cardholder data to Center V2, Vital Sign Monitor and GV-DVR / NVR once the card
reader is triggered.
Send video to Center V2 and GV- DVR / NVR when the Wiegand device is
triggered:
The selected camera(s) will start recording on the GV-Video Server and the
related video will also be sent to Center V2 and GV-DVR / NVR once the card reader
is triggered.
Note: To receive cardholder data from the GV-Video Server, the GV-DVR / NVR must be
version 8.2 or later.
For the related settings, see 4.3.3 Center V2, 4.3.4 Vital Sign Monitor and 7.3 Receiving
Cardholder Data from Video Server.
Loading ...
Loading ...
Loading ...