Loading ...
Loading ...
Loading ...
Administrator Mode
111
4
4.7.8 SNMP Setting
The Simple Network Management Protocol (SNMP) allows you to monitor the status of the
camera through SNMP network management software. Note this function is only available
for GV-VS04H (Firmware Version 1.05 or later), GV-VS11 / 12 (Firmware Version 1.05 or
later) and GV-VS14 / 2420 / 2400 / 2401 / 2820 / 2800 / 21600.
Figure 4-45
1. Select Enable SNMPv1 SNMPv2c to enable the function.
2. To enable access to Read/Write Name, type a name string. This will serve as a
password to allow read and write access to the camera from the SNMP software.
3. To enable Read only Name, type a name string to allow read-only access to the
camera from the SNMP software.
4. For a more secured connection, select Enable SNMPv3 to enable SNMP version 3.
5. To enable access to SNMPv3 Read/write Name, type a name string.
6. Select an Authentication Type to use for SNMP requests.
7. Type the Authentication Password and Current password (Encrypted). You will
need to type these passwords in the SNMP software to be able to access the camera.
8. To enable access to SNMPv3 Read only name, follow steps 5 to 7.
9. Click Apply to save the settings.
Loading ...
Loading ...
Loading ...