Geovision GV-VS2400 4 Channel TVI H.264 Video Server

Geovision GV-Video Server User Manual - Page 115

For GV-VS2400.

PDF File Manual, 185 pages, Read Online | Download pdf file

GV-VS2400 photo
Loading ...
Loading ...
Loading ...
Administrator Mode
105
4
[UPnP Settings]
UPNP: UPnP (Universal Plug & Play) is a networking architecture that provides
compatibility among networking equipment, software and peripherals of the 400+
vendors that are part of the Universal Plug and Play Forum. It means that they are
listed in the network devices table for the operating system (such as Windows XP)
supported by this function. Enabling this function, you can connect to the GV-Video
Server directly by clicking on the GV-Video Server listed in the network devices table.
DLNA: allows the DLNA certified devices to automatically communicate with each
other once connected to the same network. The function is currently supported with
Windows Media Player for recording playback.
Note:
1. The DLNA function is only supported by GV-VS04H / 11 / 12 / 14.
2. The DLNA function is only supported with Windows Media Player version 1.1 or
later. To play back recorded videos with Windows Media Player, you must have
installed GeoVision codec or accessed GV-Video Server Web interface.
3. The DLNA function does not support the connection to TV.
[QoS Settings]
The Quality of Service (QoS) is a bandwidth control mechanism that guarantees delay-
sensitive data flows, such as voice and video streams, to obtain a certain amount of
bandwidth in keeping the streaming smooth.
To apply QoS to the GV-Video Server, all network routers must support QoS and QoS
must be enabled on these devices. To enable the QoS on the GV-Video Server, enter a
Differentiated Services Code Point (DSCP) value. This value is a field in an IP packet that
enables different levels of services for the network traffic. When the video stream from the
GV-Video Server reaches a router, the DSCP value will tell the router what service level to
be applied, e.g. the bandwidth amount. This value ranges from 0 to 63 in decimal format.
The default value is 0, meaning QoS is disabled.
Note this function is only available for GV-VS04H (Firmware Version 1.05 or later), GV-
VS11 / 12 (Firmware Version 1.05 or later) and GV-VS14 / 2420 / 2400 / 2401 / 2820 /
2800 / 21600.
Loading ...
Loading ...
Loading ...