Loading ...
Loading ...
Loading ...
64
4.1.6 Tampering Alarm
Note this option is only available for GV-VS04H (Firmware Version 1.03 or later), GV-VS11
/ 12 (Firmware Version 1.02 or later) and GV-VS14 / 2420 / 2400 / 2401 / 2820 / 2800 /
21600.
The Tampering Alarm is used to detect when a camera is being physically tampered with.
An alarm can be generated when the camera is moved, covered up, or out of focus. The
alarm activation includes output device trigger, e-mail alerts and system buzzer. To have
the tampering alarm, first set up the following:
To trigger the output device when a tamper event occurs, enable the output setting and
select Tampering Alarm for the related camera. See Output Setting in 4.2.2
Input/Output Settings.
To trigger the e-mail alert when a tamper event occurs, enable the e-mail setting and
select Tampering Alarm for the related camera. See 4.3.1 E-Mail.
To trigger the system buzzer when a tamper event occurs, enable the buzzer setting.
See 4.2.4 Buzzer.
Figure 4-13
Loading ...
Loading ...
Loading ...