Loading ...
Loading ...
Loading ...
Administrator Mode
69
4
4.2.1 PTZ Settings
Through the RS-485 interface on the I/O terminal block, you can connect PTZ cameras to
GV-Video Server. In addition, you can also connect your GV-VS2420 / 2400 / 2401 / 2800
/ 21600 directly through coaxial cables.
To configure PTZ settings:
1. Select the Enable Option.
2. Select a model name or a protocol from the PTZ Name drop-down list according to
your camera models.
For the PTZ camera adopting HD-TVI / AHD standard, select HD-TVI / AHD
Coaxial for coaxial cable transmission.
For the PTZ camera using RS-485 connection, select one of the others that
corresponds to your PTZ camera.
3. Only for RS-485 connection, select a value corresponding to your PTZ camera from
the Baud Rate and PTZ Address drop-down lists.
4. Click Save to save the above settings.
[Coaxial Settings]
Camera 1-16: The number of cameras the GV-Video Server can connect to vary from
model to model. Only for GV-VS2420 / 2400 / 2401 / 2800 / 21600 connected with
HD-TVI / AHD camera, select the type of PTZ camera from the Camera drop-down list
to enable coaxial cable transmission. For this specific model, DS-2AE5223TA-A of
Hikvision, select HIKVISION. For other models of Hikvision or other cameras,
Generic is selected by default.
Loading ...
Loading ...
Loading ...