Loading ...
Loading ...
Loading ...
Administrator Mode
59
4
Camera Config
Note this function is only available for GV-VS21600 (Firmware Version 1.01 or later).
GV-VS21600 supports up to 16 channels of 2 MP or 8 channels of 3 / 4 / 5 MP cameras.
The number of channels available varies depending on the combination of cameras, with
different resolutions, connected. Camera Config is used to help you clarify the available
channels for each resolution and designate each channel to 2 MP or 3 / 4 / 5 MP cameras for
connection.
Figure 4-7
1. Under Camera Config Setting, select Support 5M/4M/3M Camera.
2. Based on the resolutions and numbers of the connected cameras, select a combination
from the drop-down list under Select Camera type config.
3. Click the channels connected to 3 / 4 / 5 MP cameras under 5M/4M/3M Camera and to
2 MP cameras under 2M Camera.
4. Click Apply. The system will reboot to apply the setting.
After rebooting, you can check the resolution and connection status of each camera from
Camera Config Status. The camera resolution will be shown in blue if successfully connected,
while in red if disconnected.
Loading ...
Loading ...
Loading ...