Loading ...
Loading ...
Loading ...
94
[ONVIF]
To enable these options, you must first select the Activate Link option above.
Enable Authentication: The ID and password of the camera are required to access
the camera when accessing by a third-party software through ONVIF.
Enable Discovery Mode: Allows the third-party software to browse this camera.
Note: The ONVIF protocol is only supported by GV-VS2420 / 2400 (firmware V1.03 or later) /
2401 and GV-VS2820 / 2800 / 21600.
4.3.9.1 RTSP Multicast
Only for GV-VS2401 V1.02 or later, GV-VS2800 / 2820 V1.07 or later and GV-VS21600
V1.03 or later, the video server is able to send video and audio streams to a multicast
address via RTSP for remote access from multiple hosts without taking up the device’s
number of connections allowed.
Click Advanced RTSP/3GPP Setting in the RTSP/3GPP/ONVIF page, the following page
appears.
Figure 4-34
Select Enable for the cameras and streams you want multicast to be activated for.
Modify the default addresses and ports of video/audio streams and the Time To Live
value if necessary.
Click Apply. The streams selected are now accessible through multicast.
For details on the RTSP command, see Appendix D.
Loading ...
Loading ...
Loading ...