Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/70633913-maxisys-ultra-ev-scanner/bg39.png)
48
Analog Gauge Mode — displays the parameters in gauge charts.
Text Mode — the default mode that displays the parameters as a text list.
NOTE
Status parameters, such as a switch reading like ON, OFF, ACTIVE, and ABORT can
only be displayed in Text Mode. Value parameters, such as a sensor reading, can be
displayed in both text and graph modes.
Waveform Graph Mode — displays the parameters in waveform graphs . In this
mode, five control buttons will display on the right side of the parameter item,
allowing you to manipulate the display status.
Figure 4-18 Waveform Graph Mode Screen
1) Settings Button (SetY) — sets the minimum and maximum value of the Y axis.
2) Scale Button — changes the scale values. There are four scales available for
the X axis: x1, x2, x4 and x8. There are three scales available for the Y axis: x1,
x2, and x4.
3) Edit Button — edits the waveform color and the line thickness .
4) Zoom-in Button — tap once to display the selected data graph in full screen .
5) Exit Button — tap to exit the waveform graph mode.
Full Screen Display — this option is only available in the waveform graph mode,
and mostly used in Graph Merge status for data comparison. There are four control
buttons available on the top-right side of the screen under this mode.
Scale Button — tap to change the scale values below the waveform graph.
Loading ...
Loading ...
Loading ...